If you find that your Surround 3 speakers are too quiet and need the volume adjusted, please use the instructions below to individually control the volume of each surround.

1. Hold down the surround button (labeled as ((SUR)) on the Bar 48 / Cinema 600 remote) for 3 seconds.
   (Note: A flashing orange LED on the front of the sound bar indicates you are adjusting the volume for the left surround speaker)
2. Use the standard volume controls on the Bar 48 / Cinema 600 remote to adjust the volume of the wireless surround
3. Once the volume for the left surround speaker is set, press the surround button on the Bar 48 / Cinema 600 remote once to move to the right surround speaker.
   (Note: The LED on the front of the sound bar will be red to indicate you are adjusting the volume for the right surround speaker)
4. Use the standard volume controls on the Bar 48 / Cinema 600 remote to adjust the volume of the wireless surround
5. Once you have finished adjusting the volume for both of the surrounds, hold the surround button (Labeled as ((SUR)) on the Bar 48 / Cinema 600 remote) on the remote for 3 seconds to exit surround volume adjustment mode.
   (Note: It will also automatically exit the adjustment mode after 15-30 seconds of no activity)

To pair the optional Surround 3 wireless surround speakers to the Cinema 600, please follow the steps below.

1. Hold the "PAIR" button on the Surround 3 for three seconds
   (Note: the status light on the back of the Surround 3 should be blinking, indicating it is in pairing mode)
2. Remove the end cap on the side of the Cinema 600, then push and hold the "SURROUND PAIR" button for three seconds
   (Note: the status light on the back of the Surround 3 should be solid, indicating it has successfully paired)